|Cyan Dye Tracks Laboratory Guide|
Cyan Dye Tracks A Laboratory Guide (44K, 10 pg)
Industry Benefits of Cyan Dye Tracks
The following list summarizes many of the reasons for moving the industry towards the elimination of the need to redevelop silver soundtracks for color positive prints. In addition to the general desire for insuring the future viability of the current film production/distribution/exhibition system, it is apparent that there are numerous benefits to be realized at the processing laboratory.
Technology Path Forward
Recently, the availability of high intensity LED arrays has led to the development of a new generation of exciter lamps for projector sound heads. These developments, combined with the laboratory and environmental concerns outlined in the previous section, have led participants in the motion picture industry to readdress the question of converting from applicated silver plus Cyan Dye Tracks to dye-only sound tracks. An informal industry group, the Dye Track Committee, was formed and has held a series of meetings aimed at promoting the transition of the motion picture industry to Cyan Dye Tracks. Original committee members included representatives of Dolby, Eastman Kodak, and Technicolor. Representatives of Deluxe, CFI, Foto-Kem, Fuji, and Ultrastereo have since joined the program. This committee has recommended a three-step conversion process:
Step 1. Convert laboratories to high-magenta prints
High magenta prints are silver plus dye prints that have been made with filtration in the printer that puts most of the sound track image in the magenta dye layer. The advantage of this format is that it provides a single type of analog sound track that can be played, with low levels of sibilant (cross-modulation) distortion, on either standard IR sound readers, or the new red-light readers. It is thus a useful transition format. All laboratories are encouraged to convert to this format at their earliest convenience. More data on printer filtration and aim print densities are provided below. High-magenta prints continue to require soundtrack redeveloper application.
Step 2. Convert theaters to red readers
According to the original three-step plan, once the laboratory conversion to the high magenta format began, theaters were to be encouraged to convert their sound readers to the new red-reader systems. During this transition stage, there would be some theaters that have converted and some that have not, but all would be able to obtain good sound quality from the high-magenta prints being produced by the laboratories. It has actually turned out that many theaters (55,000+ worldwide) have already converted to red readers. Therefore, timely laboratory conversion to the high-magenta print format is necessary to insure good sound quality in the theaters.
Step 3. Convert laboratories to dye prints
The third and final step in the conversion is for laboratories to convert to dye only prints. It has been suggested that this could take place when at least 90% of the theaters in a distribution region have converted to red readers. However, the actual conversion will take place when distributors are confident that their film can be played in high quality in a sufficiently large number of theaters. Once this point is reached, the industry as a whole can reap the benefits of dye-only soundtracks.
(Note that this conversion from applicated silver soundtracks to non-applicated dye soundtracks applies to analog variable area sound tracks only. The three prominent digital sound systems can and do accommodate dye only images for their digital sound or control data.)
When printing high-magenta prints, change the printing filters to:
KODAK WRATTEN Gelatin Filter No.12, plus KODAK Color Compensating Filter 110 Cyan (Note: some "ND" filtration may also be needed for optimization.)
* The IR density should be the primary quality control parameter
This silver plus magenta dye sound track can be read by both an IR reader and a red reader, with about the same cross-modulation distortion. However, use the red reader for final cross modulation tests.
Future conversion to Cyan Dye Tracks
The following are tentative recommendations on printing cyan-Cyan Dye Tracks. As the time approaches for industry conversion, the data sheets for the print films will be updated with dye soundtrack printing recommendations.
When printing cyan dye prints, change the printing filters to:
KODAK WRATTEN Gelatin Filter No. 29 (Note: Some "ND" filtration may also be needed for optimization.)
Do not applicate with soundtrack redeveloper solution.
* The Red status A density should be the primary quality control parameter
Soundtrack Negative Densities
Although no specific recommendations have been offered with regard to soundtrack negative density, the optimum negative density will typically be higher for both the high magenta and cyan dye formats than for traditional silver plus dye prints. As always, optimum negative density should be determined using the cross-modulation test.
We've had no discussions with manufacturers of 16mm projectors. We do believe, however, that 16-mm projectors are probably more difficult to convert to red readers that 35-mm sound tracks. We do not recommend moving to Cyan Dye Tracks for 16-mm at this time. High Magenta prints are probably ok, but have not been tested.
High magenta tracks have the same frequency response and SNR as standard silver tracks. Cyan dye tracks played on red readers have much better SNR than when played on standard IR readers. However, cyan dye tracks played on red readers have about 2dB lower SNR than silver tracks on red readers. Thus Dolby recommends the use of Dolby SR noise reduction, which will eliminate the noted 2 dB lower SNR.